Follow 10 Simple Ways To Clean Your Bike’s Curberator Without Removing
The carburetor of your motorcycle often receives a great deal of dirt, dust, and grime after riding the same for several kilometers. It is an important component of your motorcycle that helps in controlling the air-fuel mixture and assures a smooth riding experience. Therefore, keeping the carburetor clean and maintained is important to make sure you ride the motorcycle. Unlike investing in several online bike accessories and necessary spare parts, pay utmost concern to cleaning the carburetor.
Here, you will get to know the common signs that make you feel like cleaning the carburetor. Also, the best possible ways to clean the mechanical components without removing the same.
Clear signs to clear the carburetor well in time
- Problem with starting the engine: Are you facing trouble starting the engine of the bike? Is it cranking? One of the reasons could be impurities inside the motorcycle carburetor. Due to this, the mechanical part fails to make the air-fuel combination goes simple. As a result, you face issues in starting the engine.
- The engine in idle condition: Another sign could be the noisy engine of your motorcycle in idle condition. After trying hard to start the bike and standing the same in idle condition, you might experience an unusual sound and the engine starts shutting down every now and then.
- Extended fuel in the carburetor: One more possible reason for having a dirty carburetor is too much fuel inside without adding the necessary air. The excess fuel can damage your bike’s parts and further degrade the running performance.
10 steps to clean the carburetor without removing
Just like investing in bike spare parts online is a beneficial way to replace the old parts with new functional ones. On the other side, there also lies the need to repair the existing parts for maintaining the motorcycle’s smooth running performance.
1. Wear your protective gear and switch off the engine
As you already know, inside the motorcycle’s carburetor system, you will find fuel and oil. So, to make sure your clothes do not get dirty, wear protective gear. Switch off the bike’s engine and wear safety eyewear to best protect your eyes.
2. Remove the air intake filter
The next step in the line is removing the air intake filter of the bike which will help to expose the backside of the carburetor. It allows you to have a close look into the carburetor’s valves. You will also view other holes and linkages of the carburetor system.
3. Take out the float
Another must-to-follow carburetor cleaning step is taking off the float by unplugging the small wrist pins. After taking off the float, you will have a clear outlook of the carburetor for further cleaning purposes.
4. Start cleaning the carburetor jets
After taking off the float, you can uninstall the jets of the carburetor for further cleaning process. Majorly, you will find primary and secondary jets that need to be cleaned thoroughly without needing any professional assistance.
5. Switch off the Petcock
Another integral component of your motorcycle’s carburetor is the petcock. You need to switch off the petcock to prevent unexpected leakage of gas.
6. Start vacuuming the surfaces
One more crucial step you must follow to clean the carburetor without removing is by using a small and portable vacuum cleaner. Using the same, you can get rid of dirt and dust while running the vacuum at low to moderate speed.
7. Start the cleaning process
In this particular step, you will actually clean the carburetor from inside and outside by using a specific cleaning agent. Gently clean the carburetor by spraying the cleaning liquid and try rubbing the surface to remove rough grime and dirt.
8. Wipe out the filths
After performing the cleaning process, you will find filths get accumulated on the surface of your motorcycle’s carburetor system. In this step, use a microfibre cloth to lift up all the filths and take the same out of the area.
9. Dry the carburetor after cleaning
After giving a final cleaning wipe to the surface of your motorcycle’s carburetor, you should let it be there for a short while. The purpose is to dry up the carburetor for seamless functionality ahead.
10. Engine test & reassemble
Once the carburetor is completely cleaned, the next step lies in reassembling all parts and testing the engine of your bike. If the engine does not make any unusual sound, then you become successful in cleaning the carburetor.
Conclusion
Maintaining the efficacy of parts and engine components is important for motorcycle riders to ensure smooth riding performance ahead. To ensure optimum mileage efficiency, seamless engine performance, and long-lasting life, start cleaning the carburetor. If you have a Hero Motocorp bike, then clean the carburetor system along with buying original spare parts at the eShop Hero Motocorp platform.
